Micromod Micro-DCI: 53MC5000 Training Manual - Manual (Page 129)

Training Manual
F-CIM Lab
9 - 15
Figure 9 .11.
FCIM BUILD
• In our program, this value should read 086. Refer to Table 9-3. Use the
UP/DOWN/LEFT/RIGHT keys to modify the data to read 086. When the value is
correct, press the F2 key (not F3) to write the new value back to the step. When the
F2 key is pressed, the Function code entered (086) will be displayed in the
FUNCTION position and the pointer will move to the next data position, in this
case the Input A. See the next figure:
Figure 9.12.
FCIM BUILD