Micromod Micro-DCI: 53MC5000 Training Manual - Manual (Page 139)

Training Manual
F-CIM Lab
9 - 25
9.4.2 Part 2 - F-CIM Programming from Micro-Tools
In Part 1, we learnt how to program F-CIM from the front keypad. In this Part, we will
learn how to program F-CIM from Micro-Tools. We will use the same control strategy
and the same worksheet (Table 9-3) for doing this F-CIM program using Micro-Tools.
1. Create a new F-CIM program:
• Select the Project Manager in Micro-Tools. From the Project Manager, select the
Project folder and then the controller that we will create the FCIM strategy for.
• When the controller tag name is highlighted, the right side window will list the
functions that can be performed for this controller (refer to figure below).
Figure 9.23.
Project Explorer
• The third item in the list is the FCIM. Right mouse click on the editor and select
edit from the pull-down menu.
• Two new windows will appear on the screen, one large window work area and
second smaller window containing a function block selection list. See the next
figure