Micromod Micro-DCI: 53MC5000 Training Manual User Manual

Page 128

Text mode
Original mode

Training Manual

F-CIM Lab

9 - 14

number is next, followed by the three possible inputs: A, B, or C. The bottom line
displays REPLACE.

Figure 9 .10.

FCIM BUILD

• In the BUILD mode, the user may elect to REPLACE the contents of the step,

INSERT a new step or DELETE the existing step. Pressing the F2 button rotates
the selection between these three options.

• We will begin modifying Step 0 to match the needs of our demo program. When

REPLACE is displayed at the bottom of the screen, press the F3 button. This will
begin the data entry phase as shown in the next figure:

• An arrow will appear on the right side of the display screen which points at the

function code entry as shown in the next figure. The default value is 042. This
value will appear at the bottom of the display and allow you to modify the value.