Micromod Micro-DCI: 53MC5000 Training Manual - Manual (Page 42)

Training Manual
Front Face Configuration Lab Part 3 – Module Configuration
5 - 2
• Press F3 to accept the
MODULE configuration mode. The following
menu will be displayed:
Figure 5.1
Configuration main
menu display
2. Change the Analog Input’s Span and Zero:
• We will change Analog Input 0’s value of Span to 300.00 and Zero to 0.
• There will be a pointer along the left side of the menu. Identify the pointer and
using the setpoint increase arrow or the setpoint decrease arrow , place the
pointer beside the
ANALOG IN menu item.