Micromod Micro-DCI: 53MC5000 Training Manual - Manual (Page 155)

Training Manual
F-TRAN Programming Lab
10- 9
• A window as shown in the next figure, will pop up next. This window has two
lists. There is a list of files to include (right side) in the build and a list of files to
exclude (left side).
Figure 10.9.
F-TRAN Files for
the build
• You should be able to see the file Ftran1 in the list on the left. Select this file by
clicking on it and then click the Add button. This will move the file to the Include
side of the window.
Figure 10 .10.
F-TRAN Files for
the build
• You should now see this file moved to the Include list on the right as shown in the
above figure. Click OK to complete the operation.
Figure 10.11.
F-TRAN Build
• You will be returned to the Build window as shown in the above figure. Note that
the Build window now indicates that the file has been selected; 1 of 1 Selected.
See above figure. We are now ready to build.
• Click on OK on the Build window to build the image file.