Micromod Micro-DCI: 53MC5000 Training Manual - Manual (Page 4)

TOC - 1
Table of Contents
Chapter 1: Introduction to the 53MC5000 Process Control Station.
Chapter 2: Hardware Familiarization Lab – Explains how to take controller apart to look at
the different hardware parts.
Chapter 3: Front-face Configuration using FCS. Explains how to load simple control
strategies from the front of the instrument using the keys.
Chapter 4: This is an extension of the front face configuration. Explains how to override
the settings of the loaded single loop control strategy. Explains how to change the span and
range, alarm settings etc.
Chapter 5: Explains how to implement a math function using FCS. The example given in
the lab is for adding a math function to a standard control strategy. The lab also covers
custom display for showing the results of the math.
Chapter 6: Introduction to Micro-Tools and Micro-DCI Communication Services: Set up
the software in the computer, configure the network and establish communication with the
controller
Chapter 7: Configuration using FCS from Micro-Tools. Loading of a two-loop control
strategy and configuration of a totalizer and a display for the totalizer.
Chapter 8: Introduction to F-CIM with a simple example F-CIM Configuration using
Micro-Tools.
Chapter 9: Introduction to F-TRAN Programming. The lab also covers one Control F-
TRAN and one Display F-TRAN program examples.