Micromod Micro-DCI: 53MC5000 Training Manual - Manual (Page 59)

7 - 1
7
Introduction to Micro-Tools
7.1 Foreword
Micro-Tools is a Windows XP Professional based Configuration Software for the
MC5000 family of Process Control Stations. Micro-Tools helps reduce controller
configuration and maintenance time by providing an easy to use view into the database
and configuration of the instrument.
7.2 Objectives
In this lab we will install Micro-Tools and Micro-DCI Comm Services in the computer.
After completing this lab, you should know how to
• Install and setup Micro-Tools in the computer
• Install and setup Micro-DCI Comm Services in the computer and add a Micro-DCI
network and devices to the network
• Install the 20 digit license strings in the License Administrator
7.2.1 System requirements:
Micro-Tools requires the following minimum computer configuration and software
installed:
• A PC with hardware compatible with Windows 2000 or XP Professional
• At least 200 MB of available hard disk space.
• CD ROM Drive
• A SVGA monitor (1024 x 768 pixels, 256 colors) or better.
• Microsoft Windows 2000 or XP Professional Operating System
• A mouse or other compatible pointing device.
• Micro-DCI Installation CD-ROM
• License serial numbers (20 digit license strings) and the hardware security key
supplied with the software.