Ocean Optics NanoCalc - Manual (Page 67)

Ocean Optics Germany GmbH Thin Film Metrology
66
10.1.11 Function buttons
If you click on the button F1, you get access to help functions.
If you click on the buttons F2 - F7 different spectra or recipes together with their layer data are loaded for
demonstration purposes. You should be able to analyze these demonstration spectra by a simple click on
the button “analyze”.
The button F8 is not used by the demo version (in full version F8 is used to save the reference spectrum to
disk).
F9 is used to load the references spectrum from disk.
If you click on the button F9 the file "reference.nan" is loaded and may be used as a reference spectrum (to
avoid a real measurement with a blank substrate). Of course this is only a very inaccurate method for fast
access to measured spectra.
If you click on the button F11 the last measured file is loaded again (if it was cleared). This file was saved on
disk as "LastMeasured_File.nan" in directory \data\Internal_Data.
If you click on the button F12 the last saved file is loaded again (if it was cleared). This file might be a
simulated or a measured file.