Ocean Optics NanoCalc - Manual (Page 16)

Ocean Optics Germany GmbH Thin Film Metrology
15
6.3 Simulate
This routine simulates a spectrum from the estimated thickness from „EditStructure“.
The structure that is simulated may be changed with button „EditStructure“, if you do not use SCOUT.
Otherwise you need SCOUT experience.
Hint:
If you want to have a short check which structure is simulated at the moment, put the mouse cursor over the
appropriate layer for some seconds and you see the layer thickness.
OR:
Leave your mouse cursor for some seconds over the button SIMULATE and look at the text in the status bar.
If you are using a SCOUT-recipe the calculation is done by SCOUT. This takes some time to transfer the
data…..
6.4 Analyze
This routine analyzes a spectrum (either simulated or measured) within the data extraction limits.
The structure that is simulated may be changed with button „EditStructure“, if you do not use SCOUT.