Ocean Optics NanoCalc - Manual (Page 53)

Ocean Optics Germany GmbH Thin Film Metrology
52
7.5.6 Measurement mode
NanoCalc can be used in reflection or transmission setup.
7.5.7 Operator mode
NanoCalc can be used in administrator or operator mode.
7.5.7.1 Internal mode
For internal purposes only (password necessary).
7.5.7.2 User mode
In user mode certain restrictions apply: e.g. the user is not allowed to edit the structure or to change the
parameters of the spectrometer.
The default password to come back to administrator mode is: ”
admin ”. This password can be changed
arbitrarily, there are no severe restrictions concerning passwords. Please use letters and numbers only.
7.5.7.3 Administrator mode
In administrator mode no restrictions apply.
This mode is reserved for the administrator of the system.