Ocean Optics NanoCalc - Manual (Page 64)

Ocean Optics Germany GmbH Thin Film Metrology
63
To delete, insert or switch layers you first have to select a layer.
You have 2 possibilities:
a. click on the label of the layer, e.g. L0 with a left mouse click
b. in submenu "layers" there is a command "select a layer"
application 4: delete a layer
First select the layer that is to be deleted (see application 3). Then press the delete button on your keyboard
Or: select the layer and use the command "delete a layer" in submenu "layers"
application 5: insert a layer (above another)
First select a layer (see application 3). Then press the insert button on your keyboard
Or: select the layer and use the command "insert a layer above" in submenu "layers"
application 6: switch layers
First select a layer (see application 3). Then press the PageUp or PageDown button on your keyboard