Ocean Optics NanoCalc - Manual (Page 58)

Ocean Optics Germany GmbH Thin Film Metrology
57
9 Special features for “internal mode”
This internal mode can only extract thicknesses in layer stacks, so this is much more restricted than
“SCOUT mode”. You do not need the SCOUT software and it may be faster than SCOUT in simple cases.
To reach this mode you have to use a lrc-recipe without an internal link to a SCOUT .sc2-recipe. There are
different possibilities to do this:
• Press SHIFT+CTRL+F12
• Or: load a special .lrc-recipe, called “no_recipe.lrc”
• Or: edit any .lrc-recipe manually: just remove the name of the .sc2-recipe after
“Scout_FileName_NC=name.sc2” in section [Scout]. Be careful with this manual editing, make a
safety copy! Finally the line should read: “Scout_FileName_NC=”
After this change, you will see a new button “EditStructure”, which allows you to edit your own layer stack.