Xerox DocuPrint NC60 - Manual (Page 96)

Novell Menu
1-90 ❖ DocuPrint NC60 System Administrator Guide
NDS Context
Set the NDS context string (from 1 to
255 characters in length).
The available values are:
A - Z, 0 - 9, hyphen (-), period (.),
underscore (_), equal (=)
Null*
For this item (after Step 3), Item Up
moves the cursor to the right through
the displayed NDS Context string and
Item Down moves the cursor to the
left. This allows you to change
characters within the string rather
than having to reenter the entire
string.
With the cursor displayed under a
character, Value Up increments the
value of that character and Value
Down decrements the value.
1. Press Menu Up or Menu
Down until you see:
Menus
Novell Menu
2. Press Item Up or Item Down
until you see:
Novell Menu
NDS Context
3. Press Value Up or Value Down.
You will see:
NDS Context =
xxx...xxx
4. Press Value Up or Value Down
to change the value of the
character above the cursor. The
value is incremented or
decremented by 1 each time
the key is pressed. Holding
down Value Up or Value
Down causes continuous
scrolling through the values.
NDS Context =
xxx...xxx
5. To change other characters in
the NDS Context string, press
Item Up or Item Down to
scroll right or left respectively
through the character string,
then press Value Up or Value
Down to change the value of
the character above the cursor
(as in Step 4).
NDS Context =
xxx...xxx
6. When you have completed
setting the NDS Context, press
Enter. You will see:
Novell Menu
NDS Context
7. Press Online. You will see: Ready
Table 1.17 Novell Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.17 Page 7 of 7