Procedure d, Insert into novell queue, Procedure d -26 – Xerox DocuPrint NC60 User Manual
Page 160
Upgrading the Printer Software
4-26
❖
DocuPrint NC60 System Administrator Guide
Procedure D
Insert into Novell Queue
Once the upgrade process has begun do not power
off your printer!
1
Print a Configuration Sheet and a Diagnostics Page.
Keep these pages for future reference. For directions on
doing this, refer to Table 1.20 on page 1-101.
2
Start PCONSOLE.
3
Select Print Queue Information then press [RETURN].
4
Select the print queue to send the job to, then press
[RETURN].
5
Select Current Print Job Entries then press [RETURN].
6
Press the [INSERT] key. Type in the path/filename and
press [RETURN].
7
Choose configuration and then press [RETURN].
8
Press the [ESC] key. Select Yes then press [RETURN].
9
The upgrade file will be sent to the printer. The upgrade
should take less than 10 minutes to perform.
10
To see if your upgrade was successful, see the section
“Determining a Successful Upgrade” (page 4-20). If
successful, follow the instructions in the section “After the
Upgrade” (page 4-20).