Xerox DocuPrint NC60 - Manual (Page 118)

Reset Menu
1-112 ❖ DocuPrint NC60 System Administrator Guide
Disk Initialize
Initialize the Hard Disk Drive.
The available values are:
Yes
No*
This function is ignored if the disk is
locked (write protected) via a PJL or
SNMP command.
1. Press Menu Up or Menu
Down until you see:
Menus
Reset Menu
2. Press Item Up or Item Down
until you see:
Reset Menu
Disk Initialize
3. Press Value Up or Value Down
until you see:
Disk Initialize
Yes
4. Press Enter. You will see: Disk Initialize
Please Wait
5. When the action is complete,
you will see:
Ready
Disk Format
Request a complete format of the disk
directory.
The available values are:
Yes
No*
This item is used only if the disk has
not been formatted previously (e.g.
field disk replacement).
1. Press Menu Up or Menu
Down until you see:
Menus
Reset Menu
2. Press Item Up or Item Down
until you see:
Reset Menu
Disk Format
3. Press Value Up or Value Down
until you see:
Disk Format
Yes
4. Press Enter. You will see: Disk Format
Please Wait
5. When the action is complete,
you will see:
Ready
Table 1.21 Reset Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.21 Page 3 of 3