Xerox DocuPrint NC60 - Manual (Page 93)

Novell Menu
Chapter 1: Configuring the Printer ❖ 1-87
PServer Name
Set the name of the PServer in this
printer (a name of 1 to 47 characters
in length).
The available values are:
A - Z, 0 - 9, hyphen (-),underscore (_)
XRX_*
For this item (after Step 3), Item Up
moves the cursor to the right through
the displayed PServer name and Item
Down moves the cursor to the left.
This allows you to change characters
within the string rather than having to
reenter the entire string.
With the cursor displayed under a
character, Value Up increments the
value of that character and Value
Down decrements the value.
1. Press Menu Up or Menu
Down until you see:
Menus
Novell Menu
2. Press Item Up or Item Down
until you see:
Novell Menu
PServer Name
3. Press Value Up or Value Down.
You will see:
PServer Name =
xxx...xxx
4. Press Value Up or Value Down
to change the value of the
character above the cursor. The
value is incremented or
decremented by 1 each time
the key is pressed. Holding
down Value Up or Value
Down causes continuous
scrolling through the values.
PServer Name =
xxx...xxx
5. To change other characters in
the PServer name, press Item
Up or Item Down to scroll
right or left respectively
through the character string,
then press Value Up or Value
Down to change the value of
the character above the cursor
(as in Step 4).
PServer Name =
xxx...xxx
6. When you have completed
setting the PServer Name,
press Enter. You will see:
Novell Menu
PServer Name
7. Press Online. You will see: Ready
Table 1.17 Novell Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.17 Page 4 of 7