Xerox DocuPrint NC60 - Manual (Page 45)

System Menu
Chapter 1: Configuring the Printer ❖ 1-39
Manual Timeout
Set time to force printing of a job
designated by the print driver to use
media fed from the manual feeder. If
media is not inserted into the manual
feeder before timeout, the job will be
printed on the media present based
on printer settings.
The available values, in minutes, are:
10
5
4
3
2
1*
Off
1. Press Menu Up or Menu
Down until you see:
Menus
System Menu
2. Press Item Up or Item Down
until you see:
System Menu
Manual Timeout
3. Press Value Up or Value Down
until you see:
Manual Timeout =
New Value
4. Press Enter. You will see: System Menu
Manual Timeout
5. Press Online. You will see: Ready
Print Quantity
Set the number of times each page is
printed (uncollated). The setting is
usually overridden by the job stream.
The available values are:
1* - 999
The number of copies changes
incrementally by 1 each time either
Value Up or Value Down is pressed.
Holding down Value Up or Value
Down causes continuous scrolling
through the number of copies.
1. Press Menu Up or Menu
Down until you see:
Menus
System Menu
2. Press Item Up or Item Down
until you see:
System Menu
Print Quantity
3. Press Value Up or Value Down
until you see:
Print Quantity =
New Value
4. Press Enter. You will see: System Menu
Print Quantity
5. Press Online. You will see: Ready
Table 1.10 System Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.10 Page 5 of 7