Xerox DocuPrint NC60 - Manual (Page 117)

Reset Menu
Chapter 1: Configuring the Printer ❖ 1-111
CRU Resets
Reset the selected CRU.
The available values are:
COLOR DEV
FUSER MOD
BLACK DEV
PRINT DRUM
1. Press Menu Up or Menu
Down until you see:
Menus
Reset Menu
2. Press Item Up or Item Down
until you see:
Reset Menu
CRU Resets
3. Press Value Up or Value Down
until you see:
CRU Resets
Yes
4. Press Enter. You will see: CRU Resets
Please Wait
5. When the action is complete,
you will see:
Ready
Restart Printer
Re-boot the printer as if the power
was cycled, but bypassing power on
diagnostics.
The available values are:
Yes
No*
This action does not remove the Reset
Menu. To do so, power off/on the
printer.
1. Press Menu Up or Menu
Down until you see:
Menus
Job Menu
2. Press Item Up or Item Down
until you see:
Job Menu
Restart Printer
3. Press Value Up or Value Down
until you see:
Restart Printer
Yes
4. Press Enter. You will see: [Startup Messages]
5. When the action is complete,
you will see:
Ready
Delete All Jobs
Delete all secure or proof jobs from
the disk.
The available values are:
Yes
No*
This function is ignored if the disk is
locked (write protected) via a PJL or
SNMP command.
1. Press Menu Up or Menu
Down until you see:
Menus
Reset Menu
2. Press Item Up or Item Down
until you see:
Reset Menu
Delete All Jobs
3. Press Value Up or Value Down
until you see:
Delete All Jobs
Yes
4. Press Enter. You will see: Delete All Jobs
Please Wait
5. When the action is complete,
you will see:
Ready
Table 1.21 Reset Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.21 Page 2 of 3