Xerox DocuPrint NC60 - Manual (Page 66)

Ethernet Menu
1-60 ❖ DocuPrint NC60 System Administrator Guide
LPR Binary PS
Enable or disable the LPR binary mode
of PostScript.
The available values are:
On
Off*
1. Press Menu Up or Menu
Down until you see:
Menus
Ethernet Menu
2. Press Item Up or Item Down
until you see:
Ethernet Menu
LPR Binary PS
3. Press Value Up or Value Down
until you see:
LPR Binary PS =
New Value
4. Press Enter. You will see: Ethernet Menu
LPR Binary PS
5. Press Online. You will see: Ready
DLC/LLC Enable
Enable or disable the DLC/LLC
protocol.
The available values are:
On*
Off
1. Press Menu Up or Menu
Down until you see:
Menus
Ethernet Menu
2. Press Item Up or Item Down
until you see:
Ethernet Menu
DLC/LLC Enable
3. Press Value Up or Value Down
until you see:
DLC/LLC Enable =
New Value
4. Press Enter. You will see: Ethernet Menu
DLC/LLC Enable
5. Press Online. You will see: Ready
DLC/LLC PDL
Set the default emulation for the DLC/
LLC protocol.
The available values are:
Auto*
PCL
PostScript
1. Press Menu Up or Menu
Down until you see:
Menus
Ethernet Menu
2. Press Item Up or Item Down
until you see:
Ethernet Menu
DLC/LLC PDL
3. Press Value Up or Value Down
until you see:
DLC/LLC PDL =
New Value
4. Press Enter. You will see: Ethernet Menu
DLC/LLC PDL
5. Press Online. You will see: Ready
Table 1.15 Ethernet Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.15 Page 2 of 10