Xerox DocuPrint NC60 - Manual (Page 108)

Service Menu
1-102 ❖ DocuPrint NC60 System Administrator Guide
Test Patterns
Enable printing of printer resident,
PostScript test patterns.
The available values are:
100% Stripe Mag Step
Black Step Pattern A
Blank Yellow Step
Color Balance PCL Pattern
Cyan Step IOT Pattern
Gray Halftone
Patterns are formatted for either Letter
or A4 paper size, regardless of the
default paper size or the actual paper
size loaded.
1. Press Menu Up or Menu
Down until you see:
Menus
Service Menu
2. Press Item Up or Item Down
until you see:
Service Menu
Test Patterns
3. Press Value Up or Value Down
until you see:
Test Patterns =
New Value
4. Press Enter. You will see: Service Menu
Test Patterns
5. Press Online. You will see: Ready
Print Quantity
Set the number of times each page is
printed (uncollated).
The available values are:
1* .. 999
The number of copies changes
incrementally by 1 each time either
Value Up or Value Down is pressed.
Holding down Value Up or Value
Down causes continuous scrolling
through the number of copies.
1. Press Menu Up or Menu
Down until you see:
Menus
Service Menu
2. Press Item Up or Item Down
until you see:
Service Menu
Print Quantity
3. Press Value Up or Value Down
until you see:
Print Quantity =
New Value
4. Press Enter. You will see: Service Menu
Print Quantity
5. Press Online. You will see: Ready
Table 1.20 Service Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.20 Page 2 of 8