Xerox DocuPrint NC60 - Manual (Page 142)

Adjusting Density and Color Balance
4-8 ❖ DocuPrint NC60 System Administrator Guide
Adjusting Density and
Color Balance
You may notice, over the course of using the printer, that
colors may change. For example, reds may begin to take
on a purple cast, or blues may take on a green cast. This
happens during the normal use of a color printer and can
be easily remedied by using the Density/Color Balance
Adjustment procedure described in this section. This
procedure, which should be done monthly, will help
correct any color shifts.
This Control Panel procedure involves printing a test page
and adjusting the densities and colors based on the
appearance of the Test Page. You may need to repeat this
procedure and test your adjustments until you achieve
the desired effect.
If, during the adjustment process, you decide to return to your
starting point; you can do so by selecting Cancel Changes
from the Color Adjust Menu.