Xerox DocuPrint NC60 - Manual (Page 176)

Control Panel Messages
5-8 ❖ DocuPrint NC60 System Administrator Guide
OFF LINE Press On Line button to return to “Ready.”
PLEASE WAIT
WARMING UP
Please wait - Warming up
POWER SAVER
MODE
Power Saver Mode
PRINTING
job filename
PROCESSING
job filename
READY
SECURE JOB
job filename
T0-RESEAT FUSER
POWER OFF/ON
Fuser thermistor fault. Reseat the fuser, then power the printer off and on. If the
fault persists, call for service.
T1-RESEAT FUSER
POWER OFF/ON
Fuser under temperature fault. Reseat the fuser, then power the printer off and
on. If the fault persists, call for service.
T2-POWER OFF
REPLACE FUSER
Fuser over termperature fault. Replace the fuser module.
TRAY 1 EMPTY Tray 1 is empty.
TRAY 2 EMPTY Tray 2 is empty.
U0-ROM ERROR
POWER OFF/ON
There is a print engine ROM fault. Power the printer off and on. If the fault
persists, call for service.
Table 5.1 Control Panel Messages and Corrective Actions
Message Explanation/Required Action