Xerox DocuPrint NC60 - Manual (Page 53)

Imaging Menu
Chapter 1: Configuring the Printer ❖ 1-47
Table 1.12 Imaging Menu functions
Menu Item and Function Keystrokes Display
Edge Smoothing
Set the default image (resolution)
enhancement mode used in PCL and
PostScript.
The available values are:
On
Off*
Edge Smoothing cannot be used
when the Halftone Type is set to
1200 Quality.
1. Press Menu Up or Menu
Down until you see:
Menus
Imaging Menu
2. Press Item Up or Item Down
until you see:
Imaging Menu
Edge Smoothing
3. Press Value Up or Value Down
until you see:
Edge Smoothing =
New Value
4. Press Enter. You will see: Imaging Menu
Edge Smoothing
5. Press Online. You will see: Ready
Color Mode
Set to allow adjustment to the color
mode.
The available values are:
Vivid*
Photo
Unadjusted
1. Press Menu Up or Menu
Down until you see:
Menus
Imaging Menu
2. Press Item Up or Item Down
until you see:
Imaging Menu
Color Mode
3. Press Value Up or Value Down
until you see:
Color Mode =
New Value
4. Press Enter. You will see: Imaging Menu
Color Mode
5. Press Online. You will see: Ready
Blk. Overprint
Set to select Black Overprint
operation.
The available values are:
On
Off*
1. Press Menu Up or Menu
Down until you see:
Menus
Imaging Menu
2. Press Item Up or Item Down
until you see:
Imaging Menu
Blk. Overprint
3. Press Value Up or Value Down
until you see:
Blk. Overprint =
New Value
4. Press Enter. You will see: Imaging Menu
Blk. Overprint
5. Press Online. You will see: Ready
Table 1.10 Page 1 of 3