Xerox DocuPrint NC60 - Manual (Page 51)

Color Adjust Menu
Chapter 1: Configuring the Printer ❖ 1-45
Color Defaults
Set to allow “resetting” all color
adjustment (Color Density, Black
Density, and Color Balance) to their
factory default values.
The available values are:
Yes
No*
Executing Color Defaults will reset to
factory defaults values and cause a
test print output, based upon those
factory default values.
1. Press Menu Up or Menu
Down until you see:
Menus
Color Adjust
2. Press Item Up or Item Down
until you see:
Color Adjust
Color Defaults
3. Press Value Up or Value Down
until you see:
Color Defaults
New Value
4. Press Enter. You will see: Color Adjust
Color Defaults
5. Press Online. You will see: Ready
Table 1.11 Color Adjust Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.10 Page 3 of 3