Xerox DocuPrint NC60 - Manual (Page 80)

Token Ring Menu
1-74 ❖ DocuPrint NC60 System Administrator Guide
NetBEUI Bin PS
Enable or disable the NetBEUI binary
mode of PostScript.
The available values are:
On
Off*
1. Press Menu Up or Menu
Down until you see:
Menus
Token Ring Menu
2. Press Item Up or Item Down
until you see:
Token Ring Menu
NetBEUI Bin PS
3. Press Value Up or Value Down
until you see:
NetBEUI Bin PS =
New Value
4. Press Enter. You will see: Token Ring Menu
NetBEUI Bin PS
5. Press Online. You will see: Ready
AppSocket Enable
Enable or disable the Token Ring
AppSocket protocol. The AppSocket
in the printer supports Ports 200,
9100, and 2105.
The available values are:
On*
Off
1. Press Menu Up or Menu
Down until you see:
Menus
Token Ring Menu
2. Press Item Up or Item Down
until you see:
Token Ring Menu
AppSocket Enabl
3. Press Value Up or Value Down
until you see:
AppSocket Enabl=
New Value
4. Press Enter. You will see: Token Ring Menu
AppSocket Enabl
5. Press Online. You will see: Ready
AppSocket PDL
Set the default emulation for the
Token Ring AppSocket protocol.
The available values are:
Auto*
PCL
PostScript
1. Press Menu Up or Menu
Down until you see:
Menus
Token Ring Menu
2. Press Item Up or Item Down
until you see:
Token Ring Menu
AppSocket PDL
3. Press Value Up or Value Down
until you see:
AppSocket PDL =
New Value
4. Press Enter. You will see: Token Ring Menu
AppSocket PDL
5. Press Online. You will see: Ready
Table 1.16 Token Ring Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.16 Page 4 of 12