Xerox DocuPrint NC60 - Manual (Page 49)

Color Adjust Menu
Chapter 1: Configuring the Printer ❖ 1-43
Table 1.11 Color Adjust Menu functions
Menu Item and Function Keystrokes Display
Color Density
Set to allow fine adjustment to the
color density.
The available values are:
+3 CMY
+2 CMY
+1 CMY
0 CMY*
-1 CMY
-2 CMY
-3 CMY
A change to Color Density (i.e.
pressing Enter after a value change)
will cause a test print output, based
upon the changed value.
1. Press Menu Up or Menu
Down until you see:
Menus
Color Adjust
2. Press Item Up or Item Down
until you see:
Color Adjust
Color Density
3. Press Value Up or Value Down
until you see:
Color Density
New Value
4. Press Enter. You will see: Color Adjust
Color Density
5. Press Online. You will see: Ready
Black Density
Set to allow fine adjustment of the
black density.
The available values are:
+3 K
+2 K
+1 K
0 K*
-1 K
-2 K
-3 K
A change to Black Density (i.e.
pressing Enter after a value change)
will cause a test print output, based
upon the changed value.
1. Press Menu Up or Menu
Down until you see:
Menus
Color Adjust
2. Press Item Up or Item Down
until you see:
Color Adjust
Black Density
3. Press Value Up or Value Down
until you see:
Black Density
New Value
4. Press Enter. You will see: Color Adjust
Black Density
5. Press Online. You will see: Ready
Table 1.10 Page 1 of 3