Xerox DocuPrint NC60 - Manual (Page 46)

System Menu
1-40 ❖ DocuPrint NC60 System Administrator Guide
Startup Page
Set to determine if a special startup
page shall be printed at each power
on.
The available values are:
Yes*
No
1. Press Menu Up or Menu
Down until you see:
Menus
System Menu
2. Press Item Up or Item Down
until you see:
System Menu
Startup Page
3. Press Value Up or Value Down
until you see:
Startup Page =
New Value
4. Press Enter. You will see: System Menu
Startup Page
5. Press Online. You will see: Ready
Print PS Errors
Set to control the use of the built in
error handler or debugger in the
PostScript interpreter.
The available values are:
On
Off*
When On, PostScript error information
is printed. When Off, the job flushes
and no information is provided.
1. Press Menu Up or Menu
Down until you see:
Menus
System Menu
2. Press Item Up or Item Down
until you see:
System Menu
Print PS Errors
3. Press Value Up or Value Down
until you see:
Print PS Errors=
New Value
4. Press Enter. You will see: System Menu
Print PS Errors
5. Press Online. You will see: Ready
Table 1.10 System Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.10 Page 6 of 7