Xerox DocuPrint NC60 - Manual (Page 114)

Service Menu
1-108 ❖ DocuPrint NC60 System Administrator Guide
Faults Active
Display all active faults on the Control
Panel display.
The available values are:
“Highest Fault”
.
.
“Lowest Fault”
Pressing Value Up or Value Down in
Step 3 scrolls through the messages.
1. Press Menu Up or Menu
Down until you see:
Menus
Service Menu
2. Press Item Up or Item Down
until you see:
Service Menu
Faults Active
3. Press Value Up or Value Down.
You will see:
Fault Message
Fault Message
4. Press Item Up or Item Down.
You will see:
Service Menu
Faults Active
5. Press Online. You will see: Ready
Fault History
Print a list of the last fifty faults.
The available values are:
“50th Fault”
.
.
“Last Fault”
Pressing Value Up or Value Down in
Step 3 scrolls through the faults.
1. Press Menu Up or Menu
Down until you see:
Menus
Service Menu
2. Press Item Up or Item Down
until you see:
Service Menu
Fault History
3. Press Value Up or Value Down.
You will see:
Log Entry # NN
Fault Description
4. Press Item Up or Item Down.
You will see:
Service Menu
Fault History
5. Press Online. You will see: Ready
S/W Levels
Display the current software versions
(or levels).
The available values are:
Adobe PostScript
Boot
Controller
IOT
Pressing Value Up or Value Down in
Step 3 scrolls through the values.
1. Press Menu Up or Menu
Down until you see:
Menus
Service Menu
2. Press Item Up or Item Down
until you see:
Service Menu
S/W Levels
3. Press Value Up or Value Down.
You will see:
Value
S/W Level
4. Press Item Up or Item Down.
You will see:
Service Menu
S/W Levels
5. Press Online. You will see: Ready
Table 1.20 Service Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.20 Page 8 of 8