Xerox DocuPrint NC60 - Manual (Page 104)

Media Server Menu
1-98 ❖ DocuPrint NC60 System Administrator Guide
Select Tray
Select the source tray from which the
job is to be printed.
The available values are:
Tray 1*
Tray 2
Manual Feeder
Appears and is a choice only when the
optional Tray 2 is installed. The Tray
Sequence setting is ignored. Media
size or type mismatches will be
handled via the current Page Policy
settings.
This tray selection is used rather
than the selection in the print
file.
1. Press Menu Up or Menu
Down until you see:
Menus
Media Server Menu
2. Press Item Up or Item Down
until you see:
Media Server Menu
Select Tray
3. Press Value Up or Value Down
until you see:
Select Tray =
New Value
4. Press Enter. You will see: Media Server Menu
Select Tray
5. Press Online. You will see: Ready
Table 1.19 Media Server Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.19 Page 2 of 2