Xerox DocuPrint NC60 - Manual (Page 150)

Upgrading the Printer Software
4-16 ❖ DocuPrint NC60 System Administrator Guide
Upgrading the Printer Software
The Printer Controller is FLASH ROM equipped. This
means as software fixes and upgrades are available, you
are able to update printer software without a service call.
The current software at the time of manufacture is
provided on the CD-ROM. The path to the software is:
In addition the newest software will always be available
on the Internet on both the Xerox ftp and world wide
web sites.
All files are compressed using PKZIP or BinHex/ StuffIt
formats to avoid corruption during transfer.
Self-extracting versions of the files exist for many
platforms. For the other platforms you will need the
appropriate decoding software.
Table 4.1 Software on the CD-ROM
Software Path to the Software
Printer Controller D\INSTAL\UTILITY\FIRMWARE\PRINTER\(version #).xfc
(version # in the form #_#_#)
Table 4.2 Software on the Internet
Software Address
Printer Controller ftp://ftp.xerox.com/pub/nc60/firmware
Printer Controller on WWW http://www.xerox.com/drivers