Xerox DocuPrint NC60 - Manual (Page 69)

Ethernet Menu
Chapter 1: Configuring the Printer ❖ 1-63
AppSocket Bin PS
Enable or disable the AppSocket
binary mode of PostScript.
The available values are:
On
Off*
1. Press Menu Up or Menu
Down until you see:
Menus
Ethernet Menu
2. Press Item Up or Item Down
until you see:
Ethernet Menu
AppSocket Bin PS
3. Press Value Up or Value Down
until you see:
AppSocket Bin PS=
New Value
4. Press Enter. You will see: Ethernet Menu
AppSocket Bin PS
5. Press Online. You will see: Ready
EtherTalk Enable
Enable or disable the Ethernet
EtherTalk protocol.
The available values are:
On*
Off
1. Press Menu Up or Menu
Down until you see:
Menus
Ethernet Menu
2. Press Item Up or Item Down
until you see:
Ethernet Menu
EtherTalk Enable
3. Press Value Up or Value Down
until you see:
EtherTalk Enable=
New Value
4. Press Enter. You will see: Ethernet Menu
EtherTalk Enable
5. Press Online. You will see: Ready
HTTP Enable
Enable or disable the Ethernet HTTP
Server protocol.
The available values are:
On*
Off
1. Press Menu Up or Menu
Down until you see:
Menus
Ethernet Menu
2. Press Item Up or Item Down
until you see:
Ethernet Menu
HTTP Enable
3. Press Value Up or Value Down
until you see:
HTTP Enable =
New Value
4. Press Enter. You will see: Ethernet Menu
HTTP Enable
5. Press Online. You will see: Ready
Table 1.15 Ethernet Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.15 Page 5 of 10