Xerox DocuPrint NC60 - Manual (Page 147)

Adjusting Density and Color Balance
Chapter 4: Maintaining the Printer ❖ 4-13
Black Density Adjustment
1 Press Item Up or Item Down until you see:
2 Press Value Up or Value Down until you see:
Values are -3K, -2K, -1K, 0, +1K, +2K, +3K.
3 Press Enter. The test page will print and the Control Panel
will display:
4 Enter “0” to set the current value or set another new value
by repeating Steps 2 and 3 above..
Color Adjust
Black Density
Black Density =
New Value
Color Adjust Menu
Black Density