Xerox DocuPrint NC60 - Manual (Page 65)

Ethernet Menu
Chapter 1: Configuring the Printer ❖ 1-59
Table 1.15 Ethernet Menu functions
Menu Item and Function Keystrokes Display
LPR Enable
Enable or disable the Ethernet LPR
protocol.
The available values are:
On*
Off
1. Press Menu Up or Menu
Down until you see:
Menus
Ethernet Menu
2. Press Item Up or Item Down
until you see:
Ethernet Menu
LPR Enable
3. Press Value Up or Value Down
until you see:
LPR Enable =
New Value
4. Press Enter. You will see: Ethernet Menu
LPR Enable
5. Press Online. You will see: Ready
LPR Banner
Enable or disable the LPR banner
sheet.
The available values are:
On
Off*
1. Press Menu Up or Menu
Down until you see:
Menus
Ethernet Menu
2. Press Item Up or Item Down
until you see:
Ethernet Menu
LPR Banner
3. Press Value Up or Value Down
until you see:
LPR Banner =
New Value
4. Press Enter. You will see: Ethernet Menu
LPR Banner
5. Press Online. You will see: Ready
LPR PDL
Set the default emulation for the
Ethernet LPR protocol.
The available values are:
Auto*
PCL
PostScript
1. Press Menu Up or Menu
Down until you see:
Menus
Ethernet Menu
2. Press Item Up or Item Down
until you see:
Ethernet Menu
LPR PDL
3. Press Value Up or Value Down
until you see:
LPR PDL =
New Value
4. Press Enter. You will see: Ethernet Menu
LPR PDL
5. Press Online. You will see: Ready
Table 1.15 Page 1 of 10