Xerox DocuPrint NC60 - Manual (Page 170)

Control Panel Messages
5-2 ❖ DocuPrint NC60 System Administrator Guide
Control Panel Messages
Listed in Table 5.1 are Control Panel messages that either:
• Cause the printer to stop printing.
• Require the user to call for service.
Also included in Table 5.1 are common, non-error
messages you are likely to see. The messages are listed in
alphabetical order.
Table 5.1 Control Panel Messages and Corrective Actions
Message Explanation/Required Action
C1-CHECK TRAY 1 Tray 1 is misinstalled or not installed in the printer.
C2-CHECK TRAY 2 Tray 2 is misinstalled or not installed in the printer.
E1-TRAY 1 JAM
OPEN PRINTER
Tray 1 misfeed. Check tray and open printer to clear.
E2-TRAY 2 JAM
OPEN PRINTER
Tray 2 misfeed. Check tray and open printer to clear.
E3-BYPASS JAM
OPEN PRINTER
Manual bypass misfeed. Open printer to clear.
E4-INPUT JAM
OPEN PRINTER
Paper jam in the input roller area. Open printer to clear.
E5-FUSER JAM
OPEN PRINTER
Paper jam in the fuser area. Open printer, open the Fuser cover, release the
Fuser lever to clear.
E6-DRUM JAM
OPEN PRINTER
Paper jam in the transfer drum area. Open the printer to clear.
E7-PRINT DRUM
JAM-OPEN PRINTER
Paper jam in the print drum area. Open printer to clear.