Xerox DocuPrint NC60 - Manual (Page 162)

Upgrading the Printer Software
4-28 ❖ DocuPrint NC60 System Administrator Guide
Procedure E MACINTOSH – XEROX PRINTER UTILITY
Once the upgrade process has begun do not power
off your printer!
1 Print a Configuration Sheet and a Diagnostics Page.
Keep these pages for future reference. For directions on
doing this, refer to Table 1.20 on page 1-101.
2 Launch the Xerox Printer Utility.
3 Select the NC60 printer to upgrade in PostScript Printers
list.
4 Select Send.
5 Locate the upgrade file.
6 Select Open to send the upgrade file to the printer.
7 The Xerox Printer Utility will send the upgrade file to the
printer. The upgrade should take less than 10 minutes.
8 To see if your upgrade was successful, see the section
“Determining a Successful Upgrade” (page 4-20). If
successful, follow the instructions in the section “After the
Upgrade” (page 4-20). For problems consult the section
“General Troubleshooting” (page 4-32).