Xerox DocuPrint NC60 - Manual (Page 78)

Token Ring Menu
1-72 ❖ DocuPrint NC60 System Administrator Guide
LPR Binary PS
Enable or disable the LPR binary mode
of PostScript.
The available values are:
On
Off*
1. Press Menu Up or Menu
Down until you see:
Menus
Token Ring Menu
2. Press Item Up or Item Down
until you see:
Token Ring Menu
LPR Binary PS
3. Press Value Up or Value Down
until you see:
LPR Binary PS =
New Value
4. Press Enter. You will see: Token Ring Menu
LPR Binary PS
5. Press Online. You will see: Ready
DLC/LLC Enable
Enable or disable the DLC/LLC
protocol.
The available values are:
On*
Off
1. Press Menu Up or Menu
Down until you see:
Menus
Token Ring Menu
2. Press Item Up or Item Down
until you see:
Token Ring Menu
DLC/LLC Enable
3. Press Value Up or Value Down
until you see:
DLC/LLC Enable =
New Value
4. Press Enter. You will see: Token Ring Menu
DLC/LLC Enable
5. Press Online. You will see: Ready
DLC/LLC PDL
Set the default emulation for the DLC/
LLC protocol.
The available values are:
Auto*
PCL
PostScript
1. Press Menu Up or Menu
Down until you see:
Menus
Token Ring Menu
2. Press Item Up or Item Down
until you see:
Token Ring Menu
DLC/LLC PDL
3. Press Value Up or Value Down
until you see:
DLC/LLC PDL =
New Value
4. Press Enter. You will see: Token Ring Menu
DLC/LLC PDL
5. Press Online. You will see: Ready
Table 1.16 Token Ring Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.16 Page 2 of 12