Xerox DocuPrint NC60 - Manual (Page 174)

Control Panel Messages
5-6 ❖ DocuPrint NC60 System Administrator Guide
J8-REPLACE
PRINT DRUM
J8 - Replace the print drum.
J9-REPLACE
FUSER MODULE
J9 - Replace the fuser module.
JA-REPLACE
FUSER OIL/PAD
Replace the fuser oil and pad.
JOB HELD
job filename
A print job is being held. Press Enter to resume printing.
LOAD 8.5x13
IN TRAY 1
Load 8
1
/
2
x 13 in. paper in tray 1.
LOAD 8.5x13
IN TRAY 2
Load 8
1
/
2
x 13 in. paper in tray 2.
LOAD 8x10 PAPER
IN TRAY 1
Load 8 x 10 in. paper in tray 1.
LOAD 8x10 PAPER
IN TRAY 2
Load 8 x 10 in. paper in tray 2.
LOAD A4 PAPER
IN TRAY 1
Load A4 (210 x 297 mm) paper in tray 1.
LOAD A4 PAPER
IN TRAY 2
Load A4 (210 x 297 mm) paper in tray 2.
LOAD A5 PAPER
IN TRAY 1
Load A5 (148 x 210 mm) paper in tray 1.
Table 5.1 Control Panel Messages and Corrective Actions
Message Explanation/Required Action