Xerox DocuPrint NC60 - Manual (Page 36)

PCL Menu
1-30 ❖ DocuPrint NC60 System Administrator Guide
Table 1.9 PCL Menu functions
Menu Item and Function Keystrokes Display Reads
Font Number
Set the ID of the default font in PCL.
The available values are:
0* - 999
To see the assigned font numbers,
print a PCL Font List.
The font number changes
incrementally to the next valid ID
each time either Value Up or Value
Down is pressed. Holding down
Value Up or Value Down causes
continuous scrolling through the font
numbers.
1. Press Menu Up or Menu
Down until you see:
Menus
PCL Menu
2. Press Item Up or Item Down
until you see:
PCL Menu
Font Number
3. Press Value Up or Value Down
until you see:
Font Number =
New Value
4. Press Enter. You will see: PCL Menu
Font Number
5. Press Online. You will see: Ready
Pitch
Set the pitch when the font selected is
a scaleable fixed pitch font. Pitch is
measured in characters per inch or
c.p.i.
The available values are:
.44 - 99.99 (10.00*)
The pitch changes incrementally by
.01 each time either Value Up or
Value Down is pressed. Holding
down Value Up or Value Down
causes continuous scrolling through
the Pitch values.
1. Press Menu Up or Menu
Down until you see:
Menus
PCL Menu
2. Press Item Up or Item Down
until you see:
PCL Menu
Pitch
3. Press Value Up or Value Down
until you see:
Pitch =
New Value
4. Press Enter. You will see: PCL Menu
Pitch
5. Press Online. You will see: Ready
Table 1.9 Page 1 of 4