Xerox DocuPrint NC60 - Manual (Page 79)

Token Ring Menu
Chapter 1: Configuring the Printer ❖ 1-73
DLC/LLC Bin PS
Enable or disable the DLC/LLC binary
mode of PostScript.
The available values are:
On
Off*
1. Press Menu Up or Menu
Down until you see:
Menus
Token Ring Menu
2. Press Item Up or Item Down
until you see:
Token Ring Menu
DLC/LLC Bin PS
3. Press Value Up or Value Down
until you see:
DLC/LLC Bin PS =
New Value
4. Press Enter. You will see: Token Ring Menu
DLC/LLC Bin PS
5. Press Online. You will see: Ready
NetBEUI Enable
Enable or disable the NetBEUI
protocol.
The available values are:
On*
Off
1. Press Menu Up or Menu
Down until you see:
Menus
Token Ring Menu
2. Press Item Up or Item Down
until you see:
Token Ring Menu
NetBEUI Enable
3. Press Value Up or Value Down
until you see:
NetBEUI Enable =
New Value
4. Press Enter. You will see: Token Ring Menu
NetBEUI Enable
5. Press Online. You will see: Ready
NetBEUI PDL
Set the default emulation for the
NetBEUI protocol. The available values
are:
Auto*
PCL
PostScript
1. Press Menu Up or Menu
Down until you see:
Menus
Token Ring Menu
2. Press Item Up or Item Down
until you see:
Token Ring Menu
NetBEUI PDL
3. Press Value Up or Value Down
until you see:
NetBEUI PDL =
New Value
4. Press Enter. You will see: Token Ring Menu
NetBEUI PDL
5. Press Online. You will see: Ready
Table 1.16 Token Ring Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.16 Page 3 of 12