Xerox DocuPrint NC60 - Manual (Page 138)

Cleaning the Printer
4-4 ❖ DocuPrint NC60 System Administrator Guide
Cleaning the Printer
The cleaning procedures described in this section will
help you maintain the optimum print quality and
minimize downtime of your DocuPrint NC60. Before you
begin, be sure that you have a basic understanding of the
parts of your printer. Also, pay strict attention to the
cautions given in each process.
Cleaning the Print
Drum Charger
The Print Drum Charger is a thin wire mesh used to place
a charge on the Print Drum. If this mesh becomes dirty
the Print Drum will not obtain a proper charge resulting
in image quality defects. To clean the Print Drum Charger,
follow these steps.
1 Open the front and top covers of the printer and locate
the Print Drum.
2 On the top left side of the Print Drum you will see a green
thumb tab. This is the Print Drum Charger cleaner slide.
3 Simply slide this Print Drum Charger cleaner slide back
and forth several times and return it to its original
location.