Xerox DocuPrint NC60 - Manual (Page 92)

Novell Menu
1-86 ❖ DocuPrint NC60 System Administrator Guide
Frame Type
Sets the frame type used for the
Novell protocol.
The available values are:
Auto*
802.2
802.3
SNAP
Ethernet II
1. Press Menu Up or Menu
Down until you see:
Menus
Novell Menu
2. Press Item Up or Item Down
until you see:
Novell Menu
Frame Type
3. Press Value Up or Value Down
until you see:
Frame Type =
New Value
4. Press Enter. You will see: Novell Menu
Frame Type
5. Press Online. You will see: Ready
Polling Interval
Set the rate (in seconds) at which the
PServer issues polling requests for
assigned queues.
The available values are:
1 - 29 (2*)
The Polling Interval changes
incrementally by 1 each time either
Value Up or Value Down is pressed.
Holding down Value Up or Value
Down causes continuous scrolling
through the values.
1. Press Menu Up or Menu
Down until you see:
Menus
Novell Menu
2. Press Item Up or Item Down
until you see:
Novell Menu
Polling Interval
3. Press Value Up or Value Down
until you see:
Polling Interval=
New Value
4. Press Enter. You will see: Novell Menu
Polling Interval
5. Press Online. You will see: Ready
Table 1.17 Novell Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.17 Page 3 of 7