Xerox DocuPrint NC60 - Manual (Page 116)

Reset Menu
1-110 ❖ DocuPrint NC60 System Administrator Guide
Table 1.21 Reset Menu functions
Menu Item and Function Keystrokes Display
Factory Defaults
Reset the printer operating
parameters to factory default settings.
The available values are:
Yes
No*
All NVM values are set to factory
defaults, with the exception of:
“Language” in the System Menu and
“Defaults” in the System Menu which
are not affected. No NVM values
associated with the Ethernet or Token
Ring interfaces are reset. Ethernet and
Token Ring values may be reset to
factory defaults via the “Network
Defaults” item.
1. Press Menu Up or Menu
Down until you see:
Menus
Reset Menu
2. Press Item Up or Item Down
until you see:
Reset Menu
Factory Defaults
3. Press Value Up or Value Down
until you see:
Factory Defaults=
Yes
4. Press Enter. You will see: Factory Defaults=
Please Wait
5. When the action is complete,
you will see:
Ready
Network Defaults
Reset all NVM parameters associated
with the Ethernet and Token Ring
interfaces to factory defaults.
The available values are:
Yes
No*
1. Press Menu Up or Menu
Down until you see:
Menus
Reset Menu
2. Press Item Up or Item Down
until you see:
Reset Menu
Network Defaults
3. Press Value Up or Value Down
until you see:
Network Defaults
Yes
4. Press Enter. You will see: Network Defaults
Please Wait
5. When the action is complete,
you will see:
Ready
Table 1.21 Page 1 of 3