Xerox DocuPrint NC60 - Manual (Page 128)

Downloading Fonts and Macros
3-6 ❖ DocuPrint NC60 System Administrator Guide
Download Fonts
The following is a sequence of commands that can be sent
to the DocuPrint NC60 to download a font to the disk.
In this example:
• %-12345X is the PJL UEL command which starts
this sequence.
• @PJL is the mandatory PJL command
following the UEL command.
• @PJL FSDOWNLOAD... downloads a font named
“font1” that is “XX” bytes in size.
• %-12345X is the UEL command which ends this
sequence.
Invoking this font requires the following PCL sequence:
Notes:
1. The case of the string ID must be the same as the case
of the fontname in the FSDOWNLOAD command.
2. The byte count (“6” in the above example) must equal
the string ID byte count plus 1.
%-12345X @PJL
@PJL FSDOWNLOAD FORMAT:BINARY NAME =”0:\pcl\fonts\font1” SIZE=XX
%-12345X
&n6Wfont1 Sets the current font ID to the given
string ID “font1”
&n6Wfont1 Associates the current font ID with the
string ID “font1”
&n6Wfont1 Selects the font referred to as “font1”
for the primary font