Xerox DocuPrint NC60 - Manual (Page 44)

System Menu
1-38 ❖ DocuPrint NC60 System Administrator Guide
Policy Timeout
Set how long the printer will wait
before taking the action defined by
the setting of Page Policy (page 1-37).
The available values, in seconds, are:
300
180
120
60
30*
0
Off
0 means immediately invoke Page
Policy. Off means never invoke Page
Policy (i.e., wait indefinitely).
1. Press Menu Up or Menu
Down until you see:
Menus
System Menu
2. Press Item Up or Item Down
until you see:
System Menu
Policy Timeout
3. Press Value Up or Value Down
until you see:
Policy Timeout =
New Value
4. Press Enter. You will see: System Menu
Policy Timeout
5. Press Online. You will see: Ready
Hold Timeout
Set the length of time a print job is to
be held at the printer when
designated as a Hold Job by the
printer driver.
The available values, in minutes, are:
10
5
4
3
2
1*
Off
The Control Panel display will indicate
“HOLD JOB” and the job filename.
The job will be released by pressing
the Enter key if the Hold Timeout
value has not been reached. If the
timeout value is exceeded, the job will
print.
1. Press Menu Up or Menu
Down until you see:
Menus
System Menu
2. Press Item Up or Item Down
until you see:
System Menu
Hold Timeout
3. Press Value Up or Value Down
until you see:
Hold Timeout =
New Value
4. Press Enter. You will see: System Menu
Hold Timeout
5. Press Online. You will see: Ready
Table 1.10 System Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.10 Page 4 of 7