Savin 1045 - Manual (Page 76)

Transmission Features
62
4
D
If you select a document with a
password, enter the password.
If the document does not have a
password, proceed to step
F.
E
Press [OK].
F
When you want to add your origi-
nals to the stored documents and
send them all at once, press [
R R R R
Origi. + Stored File] or [Stored file +
R R R R
Origi.] .
When sending only the stored doc-
uments, go to step
G.
Note
❒ When the [R Origi. + Stored File]
key is pressed, the machine
sends in the order of "Originals"
to "Stored Files". When the
[Stored file +
R Origi.] key is
pressed, the machine sends in
the order of "Stored Files" to
"Originals".
❒ The added originals are not
stored.
G
Press [OK].
Note
❒ To add an original to the stored
documents, place the original
and select any scan settings you
require.
H
Dial and press the
{{{{Start}}}} key.
Printing Stored Documents
Use this feature to print the docu-
ments stored in the document server.
Limitation
❒ Only the documents that are
stored using the fax feature can be
printed. Documents stored using
the fax feature are shown with an
"F" in front. To print documents
that are stored using the copy fea-
ture or printer feature, press the
{Document Server} key. See the
Copy Reference and Printer refer-
ence for details.
Reference
⇒ “Document Server” in the Copy
Reference manual
Note
❒ You can also print the first page
only to check the content of the
original.
❒ You can specify and print multiple
documents.
❒ When specifying and printing
multiple documents, page num-
bers are put on all the files. You can
specify whether to put page num-
bers on your files in "User Parame-
ters". The factory default is set to
"Print".
⇒ P.136 “Changing the User
Parameters”(Switch18, Bit3)