Savin 1045 - Manual (Page 171)

Changing Key Operator Settings
157
8
G
Press [Delete].
The box is deleted and "
pNot Pro-
gramed" is shown.
Note
❒ To cancel deleting a special
sender, press [Do not Delete] and
the display will return to step
F.
H
Press [Exit].
I
Press the
{{{{User Tools/Counter}}}} key.
The initial display is shown.
Programing/Editing Transfer Boxes
This feature turns your machine into
a fax relay station. Documents sent
with a SUB Code that matches the
SUB Code programed as a Transfer
Box are received, and then relayed to
the programed receiver.
Since documents can be sent to multi-
ple destinations in a single transfer re-
q u e s t , y o u c a n e c o n o m i z e o n
communication costs when sending
to remote destinations.
Note
❒ Inform the requesting party of the
SUB Code assigned to the Transfer
Box. When they wish to have a
message transferred by your ma-
chine, ask them to send the mes-
s a g e u s i n g S U B C o d e
Transmission and specifying this
SUB Code. If a password is also
programed, inform them of this
too and ask them to enter it for the
SID Code.
You can store the following items:
• SUB (required)
Up to 20 characters long and can be
composed of digits 0-9, "#", "*" and
spaces (the first character cannot
be a space).
• Box Name (required)
Up to 20 characters long.
• Password (optional)
Up to 20 characters long and can be
composed of digits 0-9, "#", "*" and
spaces (the first character cannot
be a space).
• Receiving Station (required)
You can store 5 receiving stations
(destinations to which messages
will be forwarded) for each box.
Specify receiving stations with
Quick Dials or Groups assigned to
Quick Dials that have been pro-
gramed beforehand.
Limitation
❒ After messages are transferred, a
Transfer Result Report is not sent
back to the sender.
Note
❒ After messages are transferred,
they are deleted.
GFCYUB0N
End Receiver
End Receiver
End Receiver
A
B
C
This Machine ( Transfer Station )
Print
Requesting party
Transfer
Request
SUB:7777
SUB Code : 7777
End Receiver : A,B,C
SUB Code : 8888
End Receiver : D,E,F
SUB Code : 9999
End Receiver : G,H,I
Transfer Box