Savin 1045 - Manual (Page 105)

Where Incoming Messages are Delivered - Output Tray
91
5
Where Incoming Messages are Delivered
- Output Tray
G3/G4 Separate Tray
An optional upper tray or optional finisher unit is required for using this feature.
You can specify the document feeding tray for each line. For example, you can
specify documents received through the G3-1 line to be fed to the "Internal Tray"
and documents received through the G4 line to be fed to the "Upper Tray", facil-
itating the separation of files.
Note
❒ To use this feature, specify the line and destination in "G3/G4 Separate Tray".
⇒ P.126 “Reception Mode”
Tray Shift
The optional Finisher Unit is Required.
When the optional Finisher Unit is selected for fax output, you can use the Tray
Shift function to have the internal delivery exit move to the left or right whenev-
er a fax or report is printed.
This is useful for separating faxes stacked in the finisher output tray, that is, if
the previous incoming fax was output to the left, the next incoming fax will be
output to the right and vice-versa.
Note
❒ You can turn this feature on or off with the User Parameters. When the ma-
chine is shipped, this feature is turned on by default.
⇒ P.136 “Changing the
User Parameters”(Switch19, Bit0)