Savin 1045 - Manual (Page 154)

Key Operator Setting
140
8
Changing the User Parameters
• We recommend that you print the
User Parameter list and keep it
when you program or change a
user parameter.
⇒ P.141 “Printing
the User Parameter list”
• Do not change any bit switches
other than those shown on the pre-
vious pages.
A
Press the
{{{{User Tools/Counter}}}} key.
B
Press [Facsimile Features].
The Facsimile User Tools menu is
shown.
C
Select [Key Operator Tools].
The Key Operator Tools menu is
shown.
D
Select [Parameter Setting].
Note
❒ If "Parameter Setting" is not
shown, press [
U U U U Prev.] or [T T T T Next].
E
Select the same Switch number
you want to change.
F
Select the same Bit number you
want to change.
When the Bit number is pressed,
the current value switches be-
tween 1 and 0.
Note
❒ Repeat from step F to change
another Bit number of the same
Switch.
G
Press [OK].
To cancel these settings, press [Can-
cel]
and the display will return to
step
E.
H
Repeat step
EEEEand FFFF to change the
Switch settings.
I
After all the settings are finished,
press [Exit].
J
Press the
{{{{User Tools/Counter}}}} key.
The initial display is shown.