Savin 1045 User Manual
Page 139
General Setting/Adjustment
125
7
B Press [OK].
On Hook Mode Release Time
A Select [1 minute], [3 minutes], [5
minutes]
and [10 minutes] to start
the On Hook mode.
B Press [OK].
Quick Operation Key
The Quick Operation Key can be
programed with following func-
tions.
Journal, TX File Status, Print Conf.
RX, Print Memory Lock, Select
Stored File, Send Later, Auto Doc-
ument, 2 Sided Original, Closed
Network, Polling TX, Polling RX,
Fax Header Print, Label Insertion,
Dest. Management, Forwarding,
Transfer Request
Up to three functions can be pro-
gramed in the Quick Operation
Key.
Note
❒ The factory default is as follows:
• Quick Operation Key 1
* No
• Quick Operation Key 2
TX File Status
• Quick Operation Key 2
Dest. Management
A Select Quick Operation Key
you want to program.
B Select the function you want to
program in the Quick Opera-
tion Key.
C Press [OK].
F
Press the
{{{{User Tools/Counter}}}} key.
The initial display is shown.