Savin 1045 User Manual

Page 172

Key Operator Setting

158

❒ By default, the machine prints out

received messages and the Trans-
fer Result Report that it transfers
after the transfer has finished. If
you want to turn this feature off,
please contact your service repre-
sentative.

❒ When the programed receiver is a

Multi-step Transfer Group Dial,
Multi-step Transfer takes place.

❒ You can edit boxes in the same

way as programing them. Howev-
er, to change the SUB Code itself,
you must delete it, and then pro-
gram a new SUB Code.

❒ You can edit boxes in the same

way as programing them.

Press the

{{{{User Tools/Counter}}}} key.

Press [Facsimile Features].
The Facsimile User Tools menu is
shown.

Select [Key Operator Tools].

Select [Box Setting].

Select a box to program.

If you program a new box, press
"

pNot Programed".

Note

❒ If you change a box already pro-

gramed, press it and go to step
9.

❒ If the desired box is not shown,

press [

U Prev.] or [T

T Next].

Press [Transfer Box].

Enter a Box Name.

Reference

⇒ Chapter 3, "Entering Text" in
the Basic Features manual